Calculation of the Balancing Resistors of the Wheatstone Bridge.

Vo1		mV	Measured output voltage at zero load
Vs		V	Power voltage
R2-R4		Ohm	Resistor value in the bridge
Resistor bridge			Recalculated R1 as per measured Vo1
R1	R2
		Ohm
R4	R3
		Ohm
Balancing  resistors			Parallel resistors to the R4 & R3
R4'	R3'
		Ohm
Vo2		mV	Output voltage after balancing

table of manufactured E24 resistor line
1.0	1.8	3.3	5.6
1.1	2.0	3.6	6.2
1.2	2.2	3.9	6.8
1.3	2.4	4.3	7.5
1.5	2.7	4.7	8.2
1.6	3.0	5.1	9.1